SMSC - 13D5 ~ 20D5 Single Jet Dry Type Inlet Strainer Nickel - Plated Body Vane Wheel Water Meter
Technical Specification Table
|Application||Measuring the volume of cold potable water passing through the pipeline|
Water temperature : ≤ 40 ℃
Water Pressure : ≤ 1 . 6 MPa
1 . Small , light
2 . Without retaining ring and lid
3 . Nickel - Plated body
4 . Magnetic drive , lower transmission resistance
5 . Sealed dry dial register ensures clear reading
6 . Register can rotate more than 360 ° for easily reading in any position
7 . Inlet strainer
|Compliance with Standard||Technical data conforms to ISO 4064 Class B Standard for horizontal installation|
U . S. gallon ( USG ) For selecting
Meter for hot water up to 90 ℃ is available
The meter should be installed in horizontal position with the register face upwards
Pipeline must be flushed before installation
The meter should be constantly full of water during operation
Dimensions and Weight
|Body Thread||D||G3 / 4B||G1B|
|Connector Thread||d||R1 / 2||R3 / 4|
|Body Length mm||L||80 / 110||130|
|Overall Length mm||L1||174 / 204||234|
|Meter Height mm||H||72 . 5||73|
|Weight Without Connectors Kg||0 . 44 / 0 . 52||0 . 62|
|Weight With Connectors Kg||0 . 62 / 0 . 7||0 . 9|
" L1 " is the total length when coupling gaskets without compression .
Main Technical Data
|Maximum flow rate m³ / h||Qmax||3||5|
|Nominal flow rate m³ / h||Qn||1.5||2.5|
|Transition flow rate l / h||Qt||120||200|
|Minimum flow rate l / h||Qmin||30||50|
|Maximum reading m³||99999.99995|
|Minimum reading m³||0.00005|
Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ± 5 %
In the upper zone from Qt inclusive up to and including Qmax is ± 2 %
Why choose us
1: Sample order & small quantity order is acceptable .
2: Customize according to your special request .
3: Provide free products information .
4: Various style for each products and completely series industry instruments.
5: Large stock for fast shipping .
Q: What is the price of the product ?
A: Our prices are based on the size and type of material , if you can give me the information ,
then we can give you an estimated price is for reference only . We can do any size and any desgin .
Q: What types of service ?
A: Supply technical information for your Working condition and give advise about details.
Q: How much is our minimum order quantity ?
A: Our minimun quantity is 1 Piece .
Q: Could you offer the free samples ?
A: Yeah, we could offer the free samples based on special customer.pre-production sample,production sample.